FAQ's
- Can I use multiple kits?
- Can the Transmitter or Receiver be paired with other Transmitters or Receivers?
- Do I need to power off the MyWirelessTV device after watching TV?
- How do I control the video source (e.g. cable/DirecTV box) remotely?
- How do I select a Wi-Fi channel?
- I am experiencing black bars on my 4k TV.
- I cannot control the source device with its remote control, via the MyWirelessTV 3 Receiver OR the source device is slow to respond to the remote control.
- Is CEC (Consumer Electronics Control) supported?
- Is the MyWirelessTV 3 (MWTV3) compatible with MWTV2 (2nd Gen) and MWTV200 (1st Gen)?
- I’m not seeing anything on the remote TV connected to the receiver. The LINK light is solid green on both MyWirelessTV 3 units.
- I’m not seeing video on the TV that’s connected to the transmitter.
- Must I connect a TV to the transmitter’s HDMI Out-to-TV port?
- Sometimes the infrared (IR) signal is not responsive.
- The audio and video on the receiver’s TV seems slower than on transmitter’s TV.
- The remote TV displays “Video signal is not detected.”
- The video quality is poor and sometimes there’s no video display on the receiver’s TV.
- What do the Link LED colors mean?
- When I turn on one or both TV's I get no audio or video.
- Why am I experiencing audio issues when the MyWirelessTV 3 is connected to my computer?
- Why am I experiencing lag (lip sync) or video pixilation when the MyWirelessTV 3 is connected to the network?
- Why am I having issues with the audio/video signal on my 4K TV?
- Why am I seeing a ‘snowy’ screen when my 4K Apple TV is connected to the MWTV3 Transmitter and a 1080p TV?
- Why does the reset button not work?
- Why is the Receiver (Rx) not receiving ‘true’ 4K?