Mike T
- Total activity 1077
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 571
Activity overview
Latest activity by Mike T-
Mike T commented,
Cale, The problem you have here is you have a device made for the ISP Saskel and not an NCS device. So this firmware will never load onto that device. You can try to compile your own firmware from ...
-
Mike T commented,
Cale, Our IT team has fixed the link and it is now working. I also responded to one of the two tickets you submitted. I hope that will resolve your question about the broken link. If you have any ...
-
Mike T created an article,
What is the difference between ScreenBeam Wireless Display and ScreenBeam Kit?
ScreenBeam Wireless Display and ScreenBeam Kit both provide support for Miracast, Intel® WiDi, and Actiontec Wireless Display technologies. The ScreenBeam Kit contains a USB Transmitter, enabling W...
-
Mike T created an article,
How to use the USB backchannel feature of the MyWirelessTv devices
Using USB Backchannel After connecting the computer to the Transmitter, and an HD monitor to the Receiver. Using a mini USB connector plug it into the mini USB port on the Transmitter. Get a USB c...
-
Mike T created an article,
Differences in ScreenBeam Transmitter vs ScreenBeam CMS WLAN Adapter Versions 1 and 2
In the picture below you can see the differences in the ScreenBeam Transmitter vs ScreenBeam CMS WLAN Adapter Versions 1 and 2. They are similar and sometimes can get confused with each other.
-
Mike T created an article,
Why is my Laptop/PC slow to resume from idling or screensaver mode?
This issue may occur on Windows 7 or 8 systems with Power Options set to High-Performance mode. Use the following workaround steps: Open Windows Power Options settings Navigate to USB settings Sel...
-
Mike T created an article,
What should I do if the ScreenBeam Wireless Display software cannot connect or pair with ScreenBeam Receiver?
Reboot the laptop and power cycle the Wireless Display Receiver. Also, try selecting a different wireless channel before connecting. To do this, from the "Add a Receiver" screen, click on the wirel...
-
Mike T created an article,
Visibly recognizable lip-sync or audio is out of sync with video
This issue may occur when using certain media player software such as KMPLayer. We suggest using another media player software such as Windows Media Player as a workaround.
-
Mike T created an article,
The ScreenBeam display software can't launch–it says it can't find a USB Transmitter. How can I solve this?
First, if the display software doesn't launch, wait about a minute before trying anything else. Then, unplug and plug the USB Transmitter device back in, and try launching the display software agai...
-
Mike T created an article,
ScreenBeam wireless display cannot scan or detect a ScreenBeam Receiver, and the channel selection drop-down menu does not show any channel.
This issue is most likely to occur on systems with ZoneAlarm Antivirus and Firewall software installed. Even with ZoneAlarm is temporarily disabled or exited, ScreenBeam wireless display could not ...