This is an HDCP (High Definition Content Protection) issue. There are a couple of things to verify on the TV and the Source device (DVR, Set-Top Box).
Make sure the source device and TV's have the following settings
- Resolution = 1080i/p
- Aspect = 16:9
- Tv type/Format = stretch
- Native mode = off
- HDMI audio output = Stereo or LPCM
- CEC (Consumer Electronics Communication) = off
Check with the TV manufacturer for a firmware update for the TV. Disconnect the power from the source device for 10 seconds then power back on.
Comments
0 comments
Please sign in to leave a comment.